Company: Jiangsu Jihua Electronic Technology Co., Ltd.
Address: 6th Floor, Building 2, Yongxin International Center, 31 Xindu Road, Yancheng Economic and Technological Development Zone
Contact: Sales of Yu Chenchen
Phone : 0515-88370796
Mobile : 133-9067-6806
Contact: Sales Department Liu Yajie
Phone : 0515-88560256
Mobile phone : 133-7525-8786
Contact: Sales Tingting Dong Tingting
Phone : 0515-88391962
Mobile : 189-3631-5266
Contact: Sales Department Xin Ronglan
Phone : 0515-88396686
Mobile phone : 133-3892-5166
Now do you know the installation steps of the 4-in-1 gas detector ? This series of instruments may be life-saving instruments after the key is. Let ’s take a look with the editor of the 4-in-1 gas detector .
Installation of 4-in-1 gas detector:
The four-in-one gas detector must first understand the possible leak points of the combustible gas in the monitoring area, and analyze the leakage pressure, leakage amount and direction. It is also necessary to clarify the applicable gas types and compare the density of the leaked gas with the density of the air.
Because natural gas and coal-based gas are lighter than air, they will float upwards after leakage. On the contrary, liquefied petroleum gas is heavier than air and will sink after leakage. According to these factors, the height of the detector is selected.
The second is to determine the number of detector installations based on factors such as the size of the monitoring area and the height of the space, to ensure that every position is covered when a flammable gas leaks, and to prevent monitoring blind spots.
There is also the distance between the installation position of the detector and the leak point. Before installation, it is necessary to analyze whether the leak point is slightly leaked or leaked when leaking. If it is a slight leak, the installation position must be closer to the leak point. It will be farther away.